Synchronized Disc Recording - JVC UN-AD8 Instructions Manual

3
Select and start playing the source—"FM," "AM,"
"DVD/CD," "AUX 1,"or "AUX 2."
• When recording a disc, you can also use "Synchronized
Disc Recording" (see below).
4
Start recording.
On the main unit
To stop recording:

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
This function is not available for DivX and MPEG-4 disc.
To record the entire disc
1
Load a disc and insert a recordable cassette.
• If the current playing source is not the disc player, press
DVD/CD 3, then 7.
2
Check the tape running direction and Reverse Mode
settings on the display.
• See step 2 of "Recording on a Tape" on page 28.
3
Select the disc number you want to start recording
from.
1 2 3 4
DISC DISC DISC DISC
For recording desired tracks on discs:
You can program tracks to be recorded in your preferred
order.
• Select Program Play (and make a program; see page 19)
without starting playback.
4
Start recording.
The System automatically
REC
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
• When either disc play* or recording ends, both disc player
and the cassette deck stop at the same time.
* For DVD Video: When a title is finished playing.
REC
INFO
5
DISC
DEMO
To record Program Play
1 Select Program Play (and make a program), but do not
start playback.
2 Press REC to start recording.
• When disc play stops, recording stops automatically.
To record only your favorite track
You can specify tracks to be recorded on the tape while
listening to a disc (except for DVD Video/DVD-VR).
1
Start playing a disc.
DVD/CD
2
While a track you want to record on the tape is playing...
The disc player returns to the
REC
beginning of that track and the
track is recorded on the tape.
After recording the track, the
disc player and cassette deck
On the main unit
automatically stop.
3
Repeat steps 1 and 2 to record other tracks you want.
• You can exchange the discs if necessary.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
29