Recording Discs-Disc Synchronized Recording - JVC CA-FSH300 Instructions Manual

Recording Discs
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
• See also page 14.
2
Close the cassette holder gently.
3
Press CD ‹/8 to select the CD
player as the source.
4
Press 7 to stop the disc
playback.
• You can make a program (see page
11) if you want.
5
Press REC (recording).
3 indicator lights up on the display.
6
Press TAPE ¤ ‹.
"SYNC REC" appears and 3 indicator starts
flashing slowly on the display.
CD playback and tape recording starts
automatically.
• If no cassette is inserted when you press REC
"NO TAPE" appears on the display.
• If a protected tape is inserted when you press REC
"PROTECT" appears on the display.
To stop recording for a moment, press REC.
Both the CD playback and tape recording are
paused. To resume recording, press TAPE ¤ ‹.
To stop recording, press 7.
The recording stops and the CD playback
is paused.
To record on both sides—Reverse Mode
On the remote control ONLY:
CD
Press REV.MODE (reverse mode)
#/8
repeatedly until
• When using the Reverse Mode for Disc
Synchronized Recording,
recording starts in the forward ( 3 ) direction first. When
DOWN UP
4 7 ¢
the tape reaches its end, the CD playback is paused until
the tape recording changes to the reverse direction, then the
recording continues.
To cancel the Reverse Mode, press REV.MODE repeatedly
REC
until
REC
Set enough time to allow for the disc to finish playing; otherwise,
the power will go off before recording is completed.
TAPE
REC
or is lit.
lights up and the
is lit.
When making Sleep Timer settings while doing Disc
Synchronized Recording
REC
DOWN UP
4 7 ¢
REV.MODE
18