Add Salt Reminder - Miele HG05 Operating Instructions Manual

Table of Contents

Advertisement

Add salt reminder

 Fill the salt reservoir with dishwasher
salt for reactivation when 
appears. (If it appears
Insufficient salt
during a programme, wait until the
end of the programme).
 Confirm with OK.
The message will go out.
Risk of corrosion.
Immediately after filling the salt
reservoir, run the
programme with the
programme option selected and
without any crockery in the
dishwasher to remove any traces of
salt from the cabinet.
After the salt reservoir has been filled,
the refill reminder may still appear in the
display if the salt concentration has not
yet reached the correct level. If this is
the case, confirm again with OK.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5°d - German scale).
Quick wash
Short
Before using for the first time
If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can switch
the reminders off if you wish (see
"Settings menu - Refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the
reminders back on.
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 6900G 6905

Table of Contents