Problem
The buzzer sounds.
One of the following
fault messages appears
in the display:
Technical fault FXX
Waterproof fault
Technical fault F78
Cause and remedy
Before rectifying the problem:
Switch the dishwasher off using the sensor.
There may be a technical fault.
After a few seconds:
Switch the dishwasher back on.
Select the programme you want.
Press the Start sensor.
If the fault message appears again, there is a
technical fault.
Call the Miele Service Department.
The Waterproof system has reacted.
Close the stopcock.
Call the Miele Service Department.
A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the sensor.
Switch the dishwasher back on.
Select the programme you want.
Press the Start sensor.
If the fault message appears again, there is a
technical fault.
Call the Miele Service Department.
Problem solving guide
65