Completing The Installation; Fixing The Indoor Unit In Place - Samsung MH026FNCA Installation Manual

C I
OMPLETING THE NSTALLATION

Fixing the Indoor Unit in Place

Installation plate
14
E-
After checking for gas leaks in the system, insulate the pipe, hose and cables.
Then place the indoor unit on the installation plate.
1
To avoid condensation problems, place heat-resistant polyethylene foam
separately around each refrigerant pipe in the lower part of the indoor unit.
2 Wrap the refrigerant pipe and the drain hose in the rear of the indoor unit with
the absorbent pad.
 Wind the pipe and hose three times to the end of the indoor unit with the
absorbent pad. (0.79inch interval)
3 Wind the pipe, assembly cable and drain hose with insulation tape.
4 Place the bundle (the pipe, assembly cable and drain hose) in the lower part of
the indoor unit carefully so it doesn't project from the rear of the indoor unit.
5 Hook the indoor unit to the installation plate and move the unit to the right
and left until it is securely in place.
6
Wrap the rest of the pipe with vinyl tape.
7 Attach the pipe to the wall using clamps (optional).