Left Side - HP 2000 Maintenance And Service Manual

Left side

Item
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
12 Chapter 2 External component identification
Component
External monitor port
Vents (2)
RJ-45 (network) jack
HDMI port (select models only)
USB port
Audio-in (microphone) jack
Audio-out (headphone) jack
Digital Media Slot
Drive light
Power light
Description
Connects an external VGA monitor or projector.
Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to
cool internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.
Connects a network cable.
Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or
audio component.
Connect optional USB devices.
Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.
Produce sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.
WARNING! To reduce the risk of personal injury,
adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the Regulatory, Safety, and
Environmental Notices.
When a device is connected to the jack, the computer
speakers are disabled.
Supports the following digital card formats:
●
MultiMediaCard
●
Secure Digital (SD) Memory Card
●
Secure Digital High Capacity (SDHC) Memory
Card
Blinking white: The hard drive is being accessed.
●
White: The computer is on.
●
Blinking white: The computer is in the Sleep state.
●
Off: The computer is off.