Fog lights and daytime running lights
Fig. 147 Front bumper: Protective grille/removing the fog light
ä
First read and observe the introductory information and safety warn-
ings
on page 169.
Bulb arrangement
» Fig.
147.
- Bulb for daylight driving light
A
- Light bulb for fog lights
B
Removing the cap
›
Grasp the protective grille in the areas marked by the arrows
remove the cover.
Replacing light bulbs for fog lights/daytime running lights
›
Insert your hand into the opening in the protective grille and press the
catch
» Fig. 147
- in the direction of the arrow.
›
Remove the front fog lamp.
›
Turn the connector with the bulb in counter-clockwise up to the stop and re-
move.
›
Replace the lamp, insert the connector with the new bulb and turn clockwise
up to the stop.
›
To re-install the fog light, first of all place the fog light with the lug on the side
opposite the licence plate.
›
Press in the fog lamp on the side closest to the licence plate.
›
Insert the cap, beginning with the lug on the side opposite the license plate.
›
Press in the cap on the side facing the license plate. The cap must engage firm-
ly.
172
Do-it-yourself
Fog lights - Roomster Scout
» Fig. 147
- and
Fig. 149 Front bumper: Fog lights/fog lights: Replacing the light bulb
ä
First read and observe the introductory information and safety warn-
ings
Removing the cap and fog light
›
Guide the wire clamp
Vehicle tool kit and remove the cover.
›
Use the screwdriver
- .
›
Remove the front fog lamp.
Changing light bulbs and installing fog lights
›
Press the locking button
the socket
›
Turn the socket
Ð
›
Replace the bulb, insert the socket with the new bulb and turn clockwise up to
the stop.
Fig. 148
Front bumper: Roomster Scout
on page 169.
» Fig. 148
into the opening above the fog light
» page
156, Vehicle tool kit to remove the screws
1
» Fig. 149
of the plug
.
B
with the bulb counter-clockwise up to the stop and remove.
B
» page
156,
» Fig. 149
A
and remove the plug from
£