Replacing the bulb for the low beam (Halogen projector
headlights)
ä
First read and observe the introductory information and safety warn-
ings
on page 169.
›
Remove the rubber cover
» Fig. 143
1
›
Turn the connector with the bulb in anti-clockwise direction up to the
stop
» Fig. 145
and remove it.
›
Replace the bulb, insert the connector with the new bulb and turn clockwise up
to the stop.
›
Insert the rubber cover.
Replacing the bulb for the main beam (Halogen projector
headlights)
ä
First read and observe the introductory information and safety warn-
ings
on page 169.
Fig. 145
Removing the bulb for the low
beam
on page 170.
Fig. 146
Removing the bulb for the main
beam
›
Remove the rubber cover
2
›
Turn the connector with the bulb in anti-clockwise direction up to the
stop
» Fig. 146
and remove it.
›
Replace the bulb, insert the connector with the new bulb and turn clockwise up
to the stop.
›
Insert the rubber cover.
Changing the bulb for the front turn signal light
ä
First read and observe the introductory information and safety warn-
ings
on page 169.
›
Remove the socket
» Fig. 143
B
an anti-clockwise direction and remove along with the bulb for the turn signal
light.
›
Replace the bulb, insert the socket with the new bulb and turn clockwise up to
the stop.
Changing the light bulb for the front parking light
ä
First read and observe the introductory information and safety warn-
Ð
ings
on page 169.
›
Remove the rubber cover
A
›
Grasp the lamp holder and remove it from the bulb housing.
›
Replace the light bulb and insert the lamp holder back into the headlamp with
the bulb.
›
Insert the rubber cover.
» Fig. 143
on page 170.
on page 170 or the socket
up to the stop in
3
» Fig. 143
on page 170 and
.
.
2
2nd
Fuses and light bulbs
Ð
Ð
Ð
171