Table of Contents
Advertisement
Press and hold LIGHT/
the key lock function.
Note:
• After key lock function is activated, only LIGHT key can
function normally.
SECTION 6 :
MAINTENANCE AND DISPOSAL
• The watch is water resistant but it is not recommended to make
any watch setting while exposed to excessive water or under
water. Pressing the keys while in the water or during heavy
rainstorms may cause water to enter into the unit.
• Batteries can be harmful if not disposed properly. Protect the
environment by taking exhausted batteries to authorized disposal
stations.
• Do not clean the unit with alcohol containing detergents, abrasive
or corrosive materials. Abrasive cleaning agents may scratch the
plastic parts and corrode the electronic circuit.
• Do not expose the unit to excessive force, shock, dust and
temperature or humidity. Such treatment may result in
malfunction, shorter electronic life span, damaged batteries, or
distorted parts.
• Do not tamper with the unit's internal components. Doing so
will terminate the unit's warranty and may cause damage. The
unit contains no user-serviceable parts.
for two seconds to activate/release
SECTION 7 :
TROUBLE SHOOTING GUIDE
TROUBLE
Different altitude was
This is caused by the
found for same
pressure changes due to
location in different
the activities instead of
days.
the actual sea level
pressure change.
The bar graph of the
The altitude exceeds the
altitude was kept at a
upper limit of the
high level.
display range of the bar
graph.
No bar graph was
(1) Battery has been
observed within the
altitude mode.
(2) The watch has been
(3) The altitude inferior
(1) The watch has been
The sea level
pressure or the
altitude does not
reflect the actual
value.
(2) This is caused by
20
POSSIBLE
REMEDY
CAUSE
Recalibrate the altitude
by setting the sea level
pressure.
The display range will
be readjusted for the
next update.
(1-2) Leave the watch
for one minute
changed.
and the altitude
record will start to
reset.
update again.
(3) The display range
to the lower limit of
will be readjusted
the display range of
for the next update.
the bar graph.
Re-calibrate the sea
kept in a
level pressure and
pressurized
altitude .
environment for a
period of time.
the pressure
changes due to the
activities instead of
the actual sea level
pressure change.
Advertisement
Table of Contents
