INTRODUCTION Thank you for selecting our Oregon Scientific Weather@Home Thermo Plus Bluetooth-enabled Thermo-Hygro Monitor, which has changeable display on indoor and outdoor temperatures and humidity. NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know about.
REAR VIEW REMOTE SENSOR (THGN132N) 1. LED status indicator 2. Wall mount hole 3. Battery compartment R ESE T 4. RESET hole 5. CHANNEL switch USEFUL REFERENCE Visit our website www.oregonscientific.com to learn more about the compatible sensors. GETTING STARTED 1.
NOTE Use alkaline batteries for longer usage and LOCATION MEANING consumer grade lithium batteries in temperatures Clock area Main unit batteries low below freezing. Outdoor temperature area Sensor batteries low SENSOR DATA TRANSMISSION REMOTE SENSOR To search for a sensor: The main unit can collect data from up to 5 sensors.
To auto-scan among sensors: CLOCK 1. Press and hold and MEM at a time for 2 MANUALLY SET CLOCK seconds to enable auto-scan function for all 5 channels. The temperature will be displayed 1. Press and hold MODE for 2 seconds to enter the automatically in sequential order for 3 seconds setting mode.
PAIRING YOUR WEATHER STATION NOTE As ice alert is only applicable to channel 1, to prevent flashing of LED, select other channels on First of all, you need to pair outdoor sensor. your weather station with your mobile device. will flash BACKLIGHT on the screen of the weather station while pairing and be on...
5. Tap on each channel to rename it. (Up to 20 • Automatically sync time characters including space are allowed). Tap • Show sea level pressure (not available in RAR213HGX) if completed. Tap to exit. To remove sensor: To remove any sensor from the weather station, Tap Remove station on STATION screen, all the sensors will be removed at the same time.
To automatically synchronize time: VIEW CURRENT READINGS Time and date on your weather station could be You can directly view all the weather readings from automatically synchronized by your mobile device. different sensors through the application at a time. • On SETTINGS screen, touch and slide the button to The readings are in HOME screen.
USEFUL REFERENCE The optional sensor (Model: • Do not dispose old batteries as unsorted municipal BTH Sensor) can be purchased from Oregon Scientific. waste. Collection of such waste separately for special treatment is necessary.
For any inquiry, please contact our Customer Services SPECIFICATIONS at info@oregonscientific.com. Oregon Scientific Global Distribution Limited reserves TYPE DESCRIPTION the right to interpret and construe any contents, terms MAIN UNIT and provisions in this user manual and to amend it, at 135.6 x 73 x 51.2 mm...
Abusive disposal of the product by the user involves DISPOSAL INFORMATION FOR USERS application of the administrative sanctions according to Pursuant to and in accordance with Article 14 the laws in force. of the Directive 2012/19/EU of the European Parliament on waste electrical and electronic FCC STATEMENT equipment (WEEE), and pursuant to and in accordance with Article 20 of the Directive 2013/56/...
(listed on our website at www.oregonscientific.com), or on accept any interference received, including interference the warranty card for this product) for all inquiries instead. that may cause undesired operation. Name: Oregon Scientific Inc. Address: Brea Corporate Park 3020 Saturn St. Suite 200 Brea, CA 92821 Telephone No.:...