Legends; Introduction; Attention; Note On Compliance - Oregon Scientific OUTBREAKER RA201 User Manual

LEGENDS

BOLD - Press
BOLD - Press and hold for 2 seconds
- flashing
- fast advance

INTRODUCTION

Congratulations on your purchasing the OUTBREAKER
RA201.Your RA201 is a precision device for an active life style.
RA201 is equipped with Sailing Timer, Altimeter, Barometer,
Weather forecast, Thermometer, Chronometer, Calendar Clock and
EL back light.
The RA201 has the advanced Baro-compensation technology. With
this advanced technology the RA201 is able to distinguish the
pressure change due to barometric change or altitude change. Using
this advanced Baro-compensation technology the performance of
the RA201 on the altitude reading and weather forecast will be much
more reliable.

ATTENTION !

Read this user's manual thoroughly
• The RA201 is not meant to substitute professional measurement
devices for skydiving, hang gliding, paragliding, gyrocopter
riding, flying small aircrafts or industrial precision.
• This unit employs a semiconductor pressure sensor that could be
affected by the temperature change. While taking the altitude
measurement, ensure that the unit is not exposed to sudden
temperature changes.
• It is recommended to calibrate the altitude or sea level pressure
regularly to maintain the accuracy of the watch.
• The manufacturer and its suppliers hold no responsibility to any
party or any type of claim arising from the use of this product.
• The content of this manual is subject to change without further
notice.
• The technical specifications of this product are subject to change
without further notice.
• Due to printing limitation, the displays shown in this manual
may differ from the actual display.
• The content of this manual should not be reproduced without the
permission of the manufacturer or their representative.
• If irregularity exist, press and hold MODE, SELECT, LAP and
SET key simultaneously for 2 seconds to reset the watch.

NOTE ON COMPLIANCE

Oregon Scientific OUTBREAKER conforms to the required EMC
Directive 89/336/EC and carries the respective CE marking.
4