Maintenance - Oregon Scientific BAR112 User Manual

HOW TO WALL-MOUNT OR USE THE
TABLE STAND
The unit can be wall-mounted using its recessed screw holes or
place on a flat surface by attaching the table stand.
Main Unit:
Wall-mount
Remote Sensor:
The sensor comes with a wall-mount holder and a removable stand.
Use either to hold the unit in place.
Wall-mount
When handled properly, this unit is engineered to give you years
of satisfactory service. Here are a few product care instructions:
1. Do not immerse the unit in water. If the unit comes in contact
Table Stand
2. Do not clean the unit with abrasive or corrosive materials.
3. Do not subject the unit to excessive: force, shock, dust,
4. Do not tamper with the unit's internal components. Doing so
5. Only use new batteries as specified in this instruction manual.
6. Read this instruction manual thoroughly before operating the
Table Stand
9

MAINTENANCE

with water, dry it immediately with a soft lint-free cloth.
Abrasive cleaning agents may scratch the plastic parts and
corrode the electronic circuit.
temperature, or humidity. Such treatment may result in
malfunction, a shorter electronic life span, damaged batteries, or
distorted parts.
will terminate the unit's warranty and may cause damage. The
unit contains no user-serviceable parts.
Do not mix new and old batteries as the old batteries may leak.
unit.