Table of Contents
Advertisement
While all the necessary adjustments and controls for the television are made using the remote control,
the buttons on the television may be used for some functions.
Disc Slot
C.I. Slot
Media USB Port
HDMI 2 INPUT
SOCKET
Switching On
If the RED Standby LED is unlit, check that
the plug is connected to the power supply. If
the picture does not appear, press
remote control, it may take a few moments.
To put the TV into Standby, press
remote control. To view the TV, press
The picture may take a few seconds to appear.
Using the Remote Control
To set up the TV, you will now need to use the
on screen menus. Press MENU on the remote
control to see the menus.
The on-screen menu appears as a list of five
icons. Each icon can be selected by pressing
◄ or ► on the navigation ring on the remote
control, its respective options will appear right
side.
To use the options, press
menu. Then press ▲ or ▼ on the navigation
ring to move up and down through the menu
and use
, ◄ or ► to select the required
choice. Follow the on-screen instructions. The
functions of each menu are described in detail
throughout this manual.
Using the Controls
Power
Channel Up / Programme Up
Channel Down / Programme Down
Volume up
Volume down
Menu
Input
Eject
USB (BD-LIVE™)
on the
on the
again.
to enter the sub-
16
GREEN LED − On Timer
Using the Side-Key Controls
TV mode:
To change the volume, press
To alter the channel, press
Press MENU,
sound and picture options.
Press MENU to exit.
To select an external input, press
use
, or
until the appropriate input source is selected.
Disc mode:
To play, press
; to stop, press
To eject, press
.
Please always refer to the owner's manual of
the equipment to be connected for full details.
NOTE: Inserting the headphone plug will mute
the sound from all speakers.
RED LED − Standby
GREEN LED − Power on
.
.
, or
to control the
and then
to move through the list
.
Advertisement
Table of Contents
