Table of Contents
Advertisement
Connecting External Equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch,
remove the mains plug from the wall socket.
Connect the power cord into the AC-IN socket found at the back of the TV.
Aerial cables: - - - - - - - - - - - - - - - - - - -
Connect the aerial to the
If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the
TV.
SCART cables: - - - -- - - - - - - - - - - - - - -
Connect the video recorder IN/OUT or decoder TV socket to the TV. Connect the media player SAT
socket to the decoder MEDIA REC. socket.
LAN jack: - - - -- - - - - - - - - - - - - - -
Use this to connect to a network with an always-on broadband connection. It is reserved for the usage
of BD-LIVE™.
Before running Auto Tuning put your decoder and media recorder to Standby.
HDMI® (High-Definition Multimedia Interface) is for use with a DVD, decoder or electrical equipment
with digital audio and video output. It is designed for best performance with 1080i high-definition video
signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support
VGA, SVGA, XGA, WXGA and SXGA.
NOTE: Although this TV is able to connect to HDMI equipment, it is possible that some equipment
may not operate correctly.
A wide variety of external equipment can be connected to the back of the TV, therefore the
relevant owners manuals for all additional equipment must be referred to.
If the TV automatically switches over to monitor external equipment, return to normal TV by pressing
the desired channel button. To recall external equipment, press
AC−IN
HDMI 1 INPUT
SOCKET
RGB/ PC
(antenna) socket on the rear of the TV.
10
BD-LIVE™
(LAN jack)
HDMI 2 INPUT
SOCKET
Composite INPUT
to select.
Advertisement
Table of Contents
