To Connect A Dvi Device - Toshiba 32DB833G COMBI Series Manual

Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1 terminal and audio
cables to the PC/HDMI (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 2m (6.6ft).
• An HDMI-to-DVI adapter cable transfers video only.
• Separate analogue audio cables are required for audio receivers.
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these
procedures:
• When turning on your electronic components, turn on the television first, and then the HDMI or
DVI device.
• When turning off your electronic components, turn off the HDMI or DVI device first, and then the
television.
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection,
which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that
some devices may not operate properly with the television.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.

To connect a DVI device

HDMI-to-DVI adapter cable
(not supplied)
DVI device
Audio cable for HDMI
to television connection
(not supplied)
13