What Is The Rfid Kit - Intermec EasyCoder PM4i User Manual

What Is the RFID Kit?

The RFID kit is an option for the EasyCoder® PM4i, PX4i, or
PX6i printer. With this option, your printer can read and write to
RFID tags.
Note: The RFID kit is available as a factory- or field-installed
option. The field-installed kit must be installed by an Intermec
authorized service technician. For help, contact your local
Intermec representative.
If you open the electronics cover, you will void the warranty
and may cause damage to the internal components. Opening
the electronics cover exposes the user to shock hazards,
which may result in injury or death.
The internal RFID radio module operates on the UHF band at
869 MHz or 915 MHz depending on your region.
The RFID interface board occupies one of the slots for optional
interfaces in the back of the printer and features an extra RS-232
serial interface:
•
•
EasyCoder Printer (PM4i, PX4i, and PX6i ) RFID User's Guide
The RFID Kit (Gen 2, 869 MHz) uses an
EPCglobal Gen 2-certified IM4 Module (86X
MHz RFID frequency band).
The RFID Kit (Gen 2, 915 MHz) uses an
EPCglobal Gen 2-certified IM4 Module (915
MHz RFID frequency band).
For printers running Fingerprint, the RS-232 connector is
referred to as "uart2:", "uart3:" or "uart4:" depending on
which slot is used and what other optional devices are
installed.
For printers running IPL, the RS-232 connector is not
functional.
5