Table of Contents
Advertisement
2°C (35.6°F) or lower, the RAINY icon becomes
SNOWY.
UV MEASUREMENT
The UVR138 Ultra-Violet Radiation Sensor is included
with the BAR986HG and is available as an optional item
for the BAR933HG. The UV sensor gives you the
following information at your fingertips:
•
10-hour Ultra-Violet Index (UVI) record.
•
Automatic calculation of acceptable UV exposure
times based on pre-set user profiles (4 users
maximum).
•
UVI Danger Alert when UV Index reaches unsafe
levels.
UV data is shown in the same area as the Barometer.
Press SELECT to navigate to the Barometer Area, then
press MODE to display the
UV icon and data.
NOTE Refer to the UVR138 User Manual for more
information and see below to learn about the new
additional UV features.
NEW ADDITIONAL UV FEATURES
UV EXPOSURE TIME COUNTDOWN
To set the exposure time countdown you need to set the
Skin Type and Sun Protection Factor (SPF) as follows:
1.
Press SELECT to navigate to the Barometer Area,
then press MODE to select the UV display.
<<New graphic required, see product sample for
correct graphic>>
2.
Press CHANNEL to select user 1-4.
3.
Press and hold MODE for 2 seconds to enter the
Skin Type Setting Mode of the selected user.
4.
Press UP or DOWN to choose 1 of the 4 skin type
settings. Then press MODE to confirm and enter the
SPF Set Up Mode.
5.
Press UP or DOWN to increase or decrease the
SPF value. Then press MODE to confirm and enter
the UV Exposure Time Count Down Setting Mode.
6.
Press UP or DOWN to enable or disable
countdown. Press MODE to exit the User
Remaining Exposure Time Display Mode and start
the exposure time countdown. The remaining user
UV exposure time will display and the
icon will flash.
7.
When the countdown has reached "0", an alarm will
sound for 2 minutes. Press any button to turn the
alarm off. The
icon will flash for 2 minutes even
if you have stopped the alarm sound.
19
Advertisement
Table of Contents
