TURN RADIO-CONTROLLED CLOCK ON / OFF
If you wish to manually set the clock, you must first
disable the radio-controlled feature. To do this, navigate
to the Clock / Alarm Area. Then, press and hold DOWN
on the main unit for 2 seconds. To enable it, navigate to
the Clock / Alarm Area, then press and hold UP for 2
seconds.
RF clock enabled:
RF clock disabled:
SET CLOCK
You only need to do this if you have disabled the radio-
controlled clock, or if you are too far from a RF signal.
1.
Press SELECT to navigate to the Clock Area.
will show next to the Area.
2.
Press and hold MODE for 2 seconds.
3.
Select the time zone offset hour (+ / -23 hours), 12 /
24 hour format, hour, minute, year, date / month
format, month, date, and display language.
4.
Press UP or DOWN to change the setting.
5.
Press MODE to confirm.
NOTE The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish. The language
you select determines the weekday display, talking
function and message display.
NOTE If the talk function is enabled then the talk settings
will follow after the display language. Please see the
"Talking Clock" section for further information.
SWITCH CLOCK DISPLAY
Press SELECT to navigate to the Clock Area.
show next to the Area.
Press MODE to toggle between:
•
Clock with seconds
•
Clock with day
•
Clock with time-zone offset
•
Calendar
15
will