Table of Contents
Advertisement
Chapter 4: Using the web interface
Configuring message settings
Setting up the default message options
You can set up general options for your outgoing messages. These settings
apply by default to all your outgoing messages. Note, however, that you can
change the Delivery notification setting for an individual message. For further
information, see Sending an SMS message on page 97.
Do as follows:
1. Select MESSAGES > Message settings from the left navigation pane.
2. If you want to include the original message when you reply, select Yes next
to Include message in reply.
3. Select whether or not you want Delivery notification for SMS messages.
If you click Yes, the Status column in the Sent folder will show the status of
your message when it has been sent.
4. Click Apply.
102
Handling SMS messages
Advertisement
Table of Contents
Troubleshooting
