Receiving A Message - KVH Industries LTD9116MKIT User Manual

Chapter 4: Using the web interface
Sending an SMS message to the terminal
You can send an SMS message to the terminal e.g. from a mobile phone,
using one of the mobile numbers for voice. Dial
+ <Mobile number>
The first part of the mobile number is always 870, which is the "country code"
for the BGAN system. If the mobile numbers are listed in the web interface,
you can look them up as follows:
Select PHONE BOOK > Mobile numbers. If the mobile numbers are not listed in
the web interface, refer to the documents provided with your airtime
subscription.
There are two Voice numbers, one for 3.1 kHz Audio and one for
Note
Standard Voice.

Receiving a message

If a message has arrived, the icon bar at the top of the web interface shows an
unopened envelope. Click the envelope to see the new message(s).
Otherwise, to see new messages click MESSAGES from the left navigation
pane.
The page shows new incoming messages.
The terminal does not accept more than 100 incoming messages
Note
(including read and unread messages). If you have received 100
messages, you have to delete some of them in order to free space
for new messages. Otherwise, the new messages are rejected.
If the message is not an SMS message but information of voice mail, call your
Voice mail service number to hear the Voice mail. The Voice mail service
number is normally listed in the SMS message.
You may also find the Voice mail service number under MESSAGES > Message
settings. Note that the voice mail number is only shown here if it is available
on the SIM card. Otherwise, refer to the information included with your
Airtime subscription.
100 Handling SMS messages