Avaya G650 Getting Started page 3

• Hardware-/software-based security tools
• Shared information between you and your peers
• Telecommunications security experts
To prevent intrusions to your telecommunications
equipment, you and your peers should carefully
program and configure:
• Your Avaya-provided telecommunications
systems and their interfaces
• Your Avaya-provided software applications, as
well as their underlying hardware/software
platforms and interfaces
• Any other equipment networked to your Avaya
products
TCP/IP Facilities
Customers may experience differences in product
performance, reliability and security depending upon
network configurations/design and topologies, even
when the product performs as warranted.
Standards Compliance
Avaya Inc. is not responsible for any radio or
television interference caused by unauthorized
modifications of this equipment or the substitution or
attachment of connecting cables and equipment other
than those specified by Avaya Inc. The correction of
interference caused by such unauthorized
modifications, substitution or attachment will be the
responsibility of the user. Pursuant to Part 15 of the
Federal Communications Commission (FCC) Rules,
the user is cautioned that changes or modifications
not expressly approved by Avaya Inc. could void the
user's authority to operate this equipment.
Product Safety Standards
This product complies with and conforms to the
following international Product Safety standards as
applicable:
Safety of Information Technology Equipment, IEC
60950, 3rd Edition including all relevant national
deviations as listed in Compliance with IEC for
Electrical Equipment (IECEE) CB-96A.
Safety of Information Technology Equipment,
CAN/CSA-C22.2
No. 60950-00 / UL 60950, 3rd Edition
Safety Requirements for Customer Equipment, ACA
Technical Standard (TS) 001 - 1997
One or more of the following Mexican national
standards, as applicable: NOM 001 SCFI 1993, NOM
SCFI 016 1993, NOM 019 SCFI 1998
The equipment described in this document may
contain Class 1 LASER Device(s). These devices
comply with the following standards:
• EN 60825-1, Edition 1.1, 1998-01
• 21 CFR 1040.10 and CFR 1040.11.
The LASER devices operate within the following
parameters:
• Maximum power output: -5 dBm to -8 dBm
• Center Wavelength: 1310 nm to 1360 nm
Luokan 1 Laserlaite
Klass 1 Laser Apparat
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposures. Contact your
Avaya representative for more laser product
information.
Electromagnetic Compatibility (EMC) Standards
This product complies with and conforms to the
following international EMC standards and all
relevant national deviations:
Limits and Methods of Measurement of Radio
Interference of Information Technology Equipment,
CISPR 22:1997 and EN55022:1998.
Information Technology Equipment – Immunity
Characteristics – Limits and Methods of
Measurement, CISPR 24:1997 and EN55024:1998,
including:
• Electrostatic Discharge (ESD) IEC 61000-4-2
• Radiated Immunity IEC 61000-4-3
• Electrical Fast Transient IEC 61000-4-4
• Lightning Effects IEC 61000-4-5
• Conducted Immunity IEC 61000-4-6
• Mains Frequency Magnetic Field IEC 61000-4-8
• Voltage Dips and Variations IEC 61000-4-11
• Powerline Harmonics IEC 61000-3-2
• Voltage Fluctuations and Flicker IEC 61000-3-3