Send An Emergency Alarm - Motorola Astro XTSTM 5000 User Manual

Send an Emergency Alarm

An emergency alarm sends a data transmission to the dispatcher,
which identifies the radio sending the emergency.
1 With your radio turned on,
press the Emergency
button. The red LED lights,
and you hear a short,
medium-pitched tone.
Note: To exit emergency at any time, press and hold the
Emergency button for about a second.
2 When you receive the
dispatcher's
acknowledgment, you hear
four tones, the alarm ends,
and the radio exits the
emergency mode.
If no acknowledgment is
received, the alarm ends and
the radio exits the emer-
gency mode.
Note: For Emergency Alarm with Emergency Call: The radio
enters the Emergency Call state either after it receives the
dispatcher's acknowledgment, or if you press the PTT button
while in Emergency Alarm. Go to step 2 of "Send an
Emergency Call" on page 22.
ASTRO XTS 5000 Model I
Common Radio Features
• Red LED
• Short tone
• Four tones
• Alarm ends
• Radio exits emergency
• Alarm ends
• Radio exits emergency
21