Programming Network Security - Linksys E2500 Configuration Manual

Linksys® E2500 Wireless-N Router Configuration Guide
There are two Network Name (SSID) fields, in both of them, replace the word Cisco with
Maretron, leaving the 5 digits from the serial number intact.
3.4

Programming network security

This section details the programming of WiFi/Router to ensure that wireless messages to and
from the router are encrypted against eavesdropping.
Make sure that you are looking at the Wireless Security page, by clicking on Wireless and
then Wireless Security.
Change the Security Mode to WPA2/WPA Mixed Mode for both the 5 GHz Wireless Security
and the 2.4 GHz Wireless Security categories.
Page 20 Revision 1.0