Sony Bravia KDL-37S4000 Operating Instructions Manual page 21

Connect to Input symbol on
screen
1 USB
2 HDMI IN 2
HDMI IN 1 or 3
3 2, and 2
4 i
5
1 or 1 or
3, and 1 or 3
6 /
7 / 1 or 2
8 DIGITAL
AUDIO OUT
(OPTICAL)
9
0 PC IN PC
(RGB)/
Description
You can view photographs on the Sony digital still camera,
camcorder or USB storage media connected to the TV.
HDMI 2 The digital video and audio signals are input from the
HDMI 1 or equipment.
HDMI 3 In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. Refer to page 31 to set up
this communication.
If the equipment has a DVI jack, connect the DVI jack to the
HDMI IN 3 jack through a DVI - HDMI adaptor interface
(not supplied), and connect the equipment's audio out jack to
the audio in jack in the HDMI IN 3 jacks.
~
• The HDMI jacks only support the following video inputs:
480i, 480p, 576i, 576p, 720p (50/60 Hz), 1080i (50/60 Hz),
1080p (50/60 Hz) and 1080/24p.
• Be sure to use only an HDMI cable that bears the HDMI
logo (recommended Sony HDMI cable).
• When connecting an audio system with HDMI jack, be sure
to also connect to the audio output jacks
sound from the TV on audio system.
Video 2 If you connect mono equipment, connect to the
You can listen to sound from the TV on headphones.
Video 1 or To avoid picture noise, do not connect the camcorder to the
Video 1 or video jack
Video 3 If you connect mono equipment, connect to the L(MONO)
jack
Use to record the analogue video and sound from TV to a
DVD recorder or VCR. To turn off the sound of the TV
speakers, set "Speaker" to "Audio System" (page 30). If you
connect mono equipment, connect to the L jack
~
• The monitor output jacks cannot support HD/DVD, HDMI
and PC signals source pictures, also digital audio signal for
sound.
HD/DVD 1 or
For better picture quality, component connection is
HD/DVD 2
recommended if your DVD player has a component video
output.
Use an optical audio cable.
You can listen to the sound from the TV on Hi-Fi audio
equipment. To turn off the sound of the TV speakers, set
"Speaker" to "Audio System" (page 30).
Use a PC cable (not supplied).
~
• For KDL-20S4000, the "(RGB)" and "
printed under the PC IN jacks respectively.
1 and the S video jack
1 or 3.
to listen to the
2 L jack.
1 at the same time.
.
" icons are
21
GB