GE Profile DPSB650 Technical Service Manual page 9

Control Quick Start Cycles (Model DPSB620)
Clean the lint filter.
IMPORTANT: Clean the lint filter each
time you use the dryer.
Add clothes. Do not overload. This wastes
energy and causes wrinkling.
Select the dry cycle and other
options.
For TIMED DRY, use the SET TIME
arrow pads to set the drying time.
NOTE: Any time you make a selection
that is incompatible with the chosen
dry cycle, the dryer will beep twice.
Change any of the automatic settings,
if desired, by pressing the pad beneath
the setting.
■
For best performance, adjust load size
to appropriate setting
■
Dryness level determines how dry your
clothes will be at the end of the cycle
■
Adjust temperature as recommended
on the fabric manufacturer's care label
Close the door and press START.
– 7 –