Control Drying Cycles; Control Dryness Levels - GE Profile DPSB650 Technical Service Manual

Control Drying Cycles

Control Dryness Levels

SPEED DRY
For small loads that are needed in a hurry, such as sport or school uniforms. Can also be
used if the previous cycle left some items damp, such as collars or waistbands.
DEWRINKLE
Use this feature to remove wrinkles from items that are dry or slightly damp. This cycle is
not recommended for delicate fabrics.
AIR DRY
Use this feature to tumble items without heat.
CUSTOM Cycles
(on some models)
Set up your favorite combination of settings and save them here for one-touch recall.
These custom settings can be set while a cycle is in progress.
To store a custom combination of settings:
1. Select an E T
setting.
ASY OUCH
2. Change LOAD SIZE, DRYNESS LEVEL and TEMP setting to fit your needs.
3. Select any drying OPTIONS you want.
4. Press and hold the CUSTOM pad for three seconds to store your selection.
A beep will sound and the pad will light up.
To recall your stored combination:
Press the CUSTOM pad, then press START.
To reprogram the CUSTOM settings:
Repeat steps 1-4 above.
MORE DRY
Use for heavy-duty fabrics.
DRY
Use for a normal dryness level suitable for most loads. This is the preferred cycle
for energy saving.
LESS DRY
Use for lighter fabrics.
DAMP
For leaving items partially damp.
– 10 –