Ldap Over Ssl; [Setting Up Ldap] - Konica Minolta bizhub C360 User Manual

10.2 Searching for the E-mail address in the LDAP server
Item
[Authentication
Method]
[Login Name]
[Password is
changed.]
[Password]
[Domain Name]
[Select Sever Au-
thentication Meth-
od]
[Use Referral]
[Search Condition
Attributes]
[Initial Setting for
Search Details]
10.2.4

LDAP over SSL

[Setting Up LDAP]

In the administrator mode of PageScope Web Connection, select [Network] ö [LDAP Settings] ö [Setting
Up LDAP] ö [Edit].
Item
[Enable SSL]
[Port Number
(SSL)]
[Certificate Verifi-
cation Level Set-
tings]
[Validity Period]
[CN]
[Key Usage]
bizhub C360/C280/C220 (Version 4)
Description
Select the authentication method to log in to the LDAP
server.
The authentication method must match that used in the
LDAP server.
If [anonymous] is selected, [Login Name], [Password], and
[Domain Name] can be omitted.
If [GSS-SPNEGO] is selected, log in to the server in the
Kerberos authentication method. The Kerberos authenti-
cation method is supported by Active Directory.
Enter the login name to log in to the LDAP server (up to
255 bytes).
Select this check box to change the password.
Enter the password to log in to the LDAP server (up to 128
bytes, excluding space and ").
Enter the domain name to log in to the LDAP server (up to
64 characters).
If [GSS-SPNEGO] is selected, enter the domain name of
Active Directory.
Select the server authentication method.
Select [Set Value] to use the settings of [Login Name],
[Password], and [Domain Name].
Select [User Authentication] to use the user name and
password specified for user authentication.
If [Dynamic Authentication] is selected, the system
prompts you to enter the user name and password at
LDAP searching.
Select whether to use the referral function.
Make an appropriate choice to fit the LDAP server envi-
ronment.
Select the attribute of the name used for LDAP searching.
You can toggle this attribute between [Name] (cn) and
[Nickname] (displayName).
Specify LDAP search conditions.
Description
Select this check box to encrypt SSL communication be-
tween this machine and the LDAP server.
Enter the port number to be used for SSL communication.
Default setting: 636
To verify the server certificate, configure settings to verify
the certificate.
Select whether to check that the server certificate is within
the validity period.
Select whether to check that the CN of the server certifi-
cate matches the server address.
Select whether to check that the server certificate is used
according to the purpose approved by the issuer.
10
Prior check
Server authentica-
tion method
• Authentication
Method
• Domain name
Name attribute
Prior check
Does the server sup-
port SSL?
Server port number
10-9