Removing The Battery Pack - Toshiba Satellite NB10-A Series User Manual

The operating life of the battery pack will gradually reduce through
repeated charging and discharging, and will need to be replaced when it
reaches the end of its operating life. In addition to this, you might also
replace a discharged battery pack with a charged spare when you are
operating your computer away from an AC power source for an extended
period of time.
This section explains how to remove and install the battery pack, and
begins with the removal process which is detailed through the following
steps.

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1.
2.
3.
4.
5.
User's Manual
Do not remove the battery pack while the computer is in Sleep Mode.
Data is stored in RAM, so if the computer loses power it could be lost.
In Hibernation Mode, data will be lost if you remove the battery pack or
disconnect the AC adaptor before the save is completed.
Save your work.
Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off.
Remove all cables and peripherals that are connected to the
computer.
Close the display panel and turn the computer upside down.
Loosen the screws securing the battery pack in place.
1. Screws
Figure 4-2 Loosening the screws
1
1
4-10