Windows 2000; Network Connection (Lpr/Port9100) - Konica Minolta bizhub pro 950 User Manual

3
3.4

Windows 2000

3.4.1

Network connection (LPR/Port9100)

When using the LPR/Port9100 printing, specify the port during the printer driver installation process.
TCP/IP setting for this machine
Specify the IP address in the TCP/IP Setting screen of this machine.
For details on specifying the IP address of this machine, refer to the User's Guide [POD Administrator's
Reference].
RAW port number setting for the copier
To use Port9100 printing, enable the RAW port number (9100 at default), in the TCP/IP Setting screen of the
copier.
For details on specifying the RAW port number of this machine, refer to the User's Guide [POD
Administrator's Reference].
LPD setting for the copier
To use LPR printing, enable LPD print in the LPD Setting screen of the copier.
For details on the LPD settings of this machine, refer to the User's Guide [POD Administrator's Reference].
Printer driver installation using the Add Printer Wizard
0 The installation should be performed by a qualified system administrator or printer administrator.
1
Insert the Driver CD into the CD-ROM drive of the computer.
2
Click the [Start] button, point to "Settings", and then click "Printers".
3
Double-click "Add Printer".
– The Add Printer Wizard starts.
4
Click [Next].
5
In the dialog box for specifying the connection method, select "Local printer", and then click the [Next].
– Clear the "Automatically detect and install my Plug and Play printer" check box.
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select "Standard TCP/IP Port" for "Type of port:".
7
Click the [Next].
– The Add Standard TCP/IP Printer Port Wizard starts.
8
Click the [Next].
9
In the "Printer Name or IP address" box, enter the IP address for this machine, and then click the [Next].
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Finish dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings].
11
Change the settings according to the port, and then click the [OK].
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– The information entered here is case-sensitive.
12
Click the [Next].
13
Click the [Finish].
The Add Printer Wizard appears.
3-16
Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
bizhub PRO 950 (Version 2)