Konica Minolta bizhub pro 950 User Manual page 126

7
Fold
Various ways of the folding can be setup.
Item
The [Fold] cannot be set in the following cases:
- When the [Chapter] is available in the [Layout] tab
The setting of [Fold] is available when the following unit is installed.
Item
Multi-Half Fold
Multi-Letter Fold (In/Out)
Z-Fold
Trim
Cuts the edges of the output paper.
The [Trim] cannot be set in the following cases:
- When [Trimmer] is not available in [Configure] tab.
Divide Output
Repeats to staple for every number of pages specified.
The [Divide Output] cannot be set in the following cases:
- When [Staple] is not available in the [Finish] tab.
Page per Section
When the [Divide Output] is selected, you can set the number of pages for repeating the function.
Output Tray
Sets [Default], [Main Tray] or [Sub Tray] as [Output Tray].
Each of them can/cannot be set in the following cases:
- [Sub Tray] need to be selected a Finisher on the [Configure] tab, respectively.
- When [Staple] is available in [Finish] tab, items other than [Default] and [Main Tray] cannot be set.
Output Order
Changes the output order.
[Face Down] outputs paper with the printed side facing down.
[Face Up] outputs paper with the printed side facing up.
"(1 to N)" means to output paper starting with the first page.
"(N to 1)" means to output paper starting with the last page.
7-38
Description
Multi-Half Fold
Multi-Letter Fold in
Multi-Letter Fold Out
Z-Fold
Punch Z-Fold Unit
o
PCL printer driver setting (Windows)
Finisher (FS-611)
o
o
bizhub PRO 950 (Version 2)