Konica Minolta bizhub pro 950 User Manual page 31

Installation of the printer driver (Windows) (Manual installation using the Add Printer wizard)
13
Click [Finish].
14
When installation is complete, make sure that the icon of the installed printer appears in the Printers
window.
15
Remove the CD-ROM from the CD-ROM drive.
This completes the printer driver installation.
Printer driver installation by creating a port using the Add Printer Wizard
1
Insert the Driver CD into the CD-ROM drive of the computer.
2
Click the [Start] button, and then click "Control Panel".
3
From "Hardware and Sound", click "Printer".
– If Control Panel is displayed with Classic View, double-click "Printers".
The Printers window appears.
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a local printer".
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select the port type.
– When using an LPR/Port9100 connection, select "Standard TCP/IP Port".
– When using an SMB connection, select "Local Port".
7
Click the [Next].
8
Specify the IP address and port.
– When using an LPR/Port9100 connection, select "TCP/IP Device", and then enter the IP address.
– When using an SMB connection, enter "\\NetBIOS name\print service name" in the "Enter a port
name" box.
– Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMB
Setting screen of the copier.
9
Click the [Next] button.
– If the Additional Port Information Required dialog box appears, go to step 10.
– If the Install the printer driver dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK].
– For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
– For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
– The information entered here is case-sensitive.
12
Click the [Next].
The Install the printer driver dialog box appears.
13
Click the [Have Disk].
14
Click the [Browse].
15
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open].
– Select printer driver (PCL, PostScript PPD) to be used.
bizhub PRO 950 (Version 2)
3
3-5