Husqvarna HUV 5420 DXR Owner's Manual page 38

Homologated diesel vehicle for europe

Table of Contents

Engine Oil

Figure 19 Remove Engine Oil Filter

Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.

To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2 grease (Dow

Corning

BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside surface of the filter

before attaching it to the oil filter port (Figure 20). Install the new oil filter (P/N 603 00 00-41) onto the engine oil

filter port. See following NOTE.

NOTE: Use only Husqvarna oil filters designed for your engine.

Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers.

212

Figure 21 Add Engine Oil

Page 36

HUV 5420 DX

Homologated Diesel Vehicle for Europe Owner's Manual

Figure 20 Coat Rubber Seal

Table of Contents