Temporary Manual Override - Hunter Set & Save 47300A Owner's Manual

Temporary Manual Override

To temporarily change the current set temperature without affecting your program:
or
or
hold
/return
To end the Temporary Manual Override:
hold
/return
41665-01.pmd
Press and hold for about 1 second to enter Manual
Override mode. When display flashes, you can
release the key.
Press again to change to your desired Set Tempera-
ture. Hold the key for 2 seconds to fast-advance the
Set Temperature.
Press to return to normal mode, or wait 5 seconds
for it to return automatically.
The current program number will flash to signify the
Temporary Override.
At the next program change time, the Temporary
Override is cancelled, and the next program tem-
perature becomes the setpoint temperature.
Press and wait for HOLD to display on the LCD.
Press again. This will return the set temperature to the current program set temperature.
25
25
SET TEMP
3
COOL TEMP
SA
PM
3
COOL TEMP
9/30/03, 4:53 PM