Temporary Manual Override - Hunter Thermostat Owner's Manual

Programming

Temporary Manual Override

In the following example, the present room temperature is 60°F and we want to raise the
temperature to 70°F temporarily until the next program.
To display a manual override setting, press
either arrow for less than 2 seconds.
When arrow is released, the display will
show current time and temperature.
HEAT
M T W TH F SA SU
89 :
68 60
AM
PM
SET TEMP HOLD
FILTER LO BAT
M T W TH F SA SU HEAT
89 :
70 60
AM
PM
SET TEMP HOLD
FILTER LO BAT
Press arrow to display current
COOL
c
set and room temperatures.
TEMP
Continue pressing arrow. After 2
COOL
c
seconds, the set temperature
digits will blink and begin to
TEMP
increase until the button is
released at the desired setting (in
this case 70°F).
Program number flashes.
Press return or in 10 seconds it
will return to showing current
time and temperature.
Your thermostat is now in manual override
mode to 70°F until the next program.
Indicator number flashes until the next
program time comes into effect.
26-27