Reviewing The Current Temperature Setting - Hunter Set & Save 47300A Owner's Manual

Daily
prog day
Programs
(cont.)
program
hold
/return
NOTE: Programs take affect as soon as the thermostat returns to normal mode.
If you are armchair programming the thermostat, slide the system selector to the OFF position before
mounting the thermostat to the wallplate.

Reviewing the Current Temperature Setting

or
41665-01.pmd
Press again to change to Monday's program.
Continue pressing to cycle through each day.
Press repeatedly to cycle through the 4 programs.
Press to return to normal mode.
After 15 seconds, the thermostat will return to nor-
mal mode automatically.
Current time and temperature.
Press for 1 second or less.
Set Temperature is shown above current room
temperature.
If held for over 1 second, Temporary Manual Over-
ride mode is entered. Refer to the next page.
23
M
AM
1
HEAT
SA
PM
3
HEAT TEMP
SET TEMP
3
HEAT TEMP
9/30/03, 4:53 PM