Creating Custom Progams - Hunter 42710-01 Installation And Operation Manual

METHODS OF OPErATIOn
• Program times can be set in 10 minute increments.
• Program temperature can be set in increments of 1
• After 15 seconds of inactivity during programming, the
thermostat will return to normal Display mode.
• When setting each program time, note the AM/PM indicator.
• Press H /R
OlD ETURN
your settings.
• During normal operation, if no button is pressed for 5 seconds,
the unit will return to the normal Display mode.
1. Slide the
SYSTEM SwiTcH
corresponding system.
2. Press p
ROGRAM
flash)
6. CrEATInG CUSTOM PrOGrAMS
at any time to exit Program mode and save
to HEAT or
to enter Program mode. (The lCD will begin to
39
o
cOOl to program the
o
F (1 C).