Installing The Switch Housing - Hunter 42501-01 Installation And Operation Manual

7 • Installing the Switch Housing
Steps 7-1 – 7-3
Housing
Assembly
Screw
10
Step 7-4
Hunter Fan Company
42501 Sunset Boulevard.indd
7-1. To attach the upper switch housing, partially install two #6-32 x
3/8" housing assembly screws into the switch housing mounting
plate.
7-2. Feed the upper plug connector through the center opening of
the housing.
7-3. Align the keyhole slots in the housing with the housing assembly
screws.
7-4. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining #6-32 x 3/8" screw into the housing. Tighten
all three screws firmly.
Upper
Switch
Housing
10
42501-01 • 10/24/05
10/24/2005, 11:05 AM