Installing The Switch Housing - Hunter F Owner's Manual And Installation Manual

Steps 7-1 – 7-3
Housing
Upper
Assembly
Switch
Screw
Housing
Step 7-4
7 • Installing the Switch Housing
7-1. To attach the upper switch housing, partially install two #6-32 x
3/8" housing assembly screws into the switch housing mounting
plate.
7-2. Feed the upper plug connector through the center opening of
the housing.
7-3. Align the keyhole slots in the housing with the housing assembly
screws.
7-4. Turn the housing counterclockwise until the housing assembly
screws are firmly situated in the narrow end of the keyhole slots.
Install the remaining #6-32 x 3/8" screw into the housing. Tighten
all three screws firmly.
11
45045-01 • 01/26/09 • Hunter Fan Company