Clear Cost (3-4-2-3); Clear Time (3-4-2-4); Call Rate (3-4-3); Currency (3-4-3-1) - Motorola T2688 User Manual

screen (Network support required).
♦

Clear Cost (3-4-2-3)

Press
♦

Clear Time (3-4-2-4)

Press

Call Rate (3-4-3)

♦

Currency (3-4-3-1)

Press
cost of your calls (PIN 2 is required).
♦

Charge Unit (3-4-3-2)

Press
required).
PIN2 is a second set of PIN that is mainly used to control limited services such
as call cost limitation and fixed dialing numbers.

Cost Limit (3-4-4)

You can set limits to the total call cost. If the call cost goes over the limit,
the handset can' t be used to dial a pay call. When this function is
activated, the remaining cost will appear on the screen.
Press key, and the following options will appear on the screen:
On: press
Off : press

Line in Use (3-5)

This function allows you to use two different telephone numbers for one single
handset. You can designate the number used to make a call and use both of
these numbers simultaneously to receive calls without having to use two
handsets to do so. This function is only available if your network service
provider provides such service.
After you enter this item, you can press
or Line 2), then press
or Line 2 ) will appear on the screen while in standby mode.
key to clear the call cost data (PIN 2 is required).
key to clear the call duration data.
key to enter a preferred currency base to calculate the
key to enter the unit price to calculate the cost (PIN 2 is
What is PIN2?
key to activate the cost limit function (PIN2 is required).
key to deactivate this function.
key to confirm. The number you selected (Line 1
key to choose the number (Line 1
32