Table of Contents
Advertisement
1
.1 Turn On the Phone Power
Long press
standby mode.
1
.2 Turn Off the Phone Power
Long press
key for a few seconds to turn off the phone power.
1
.3 Make a Call
Long press
Œ
Enter your PIN and press
•
After the PIN is accepted, your phone will start searching for the
Ž
designated network automatically.
After connecting to the network successfully, the LCD display will show
•
which network you connect to and go into standby mode.
In this standby mode, dial the phone number including the area code.
•
Then, press
♦
♦
♦
1
.4 End a Call
Press
key to end or cancel a call.
Chapter 1: Basic Operation
key for a few seconds to turn on the phone power and enter
key for a few seconds to switch your phone on.
key to send out your call.
When the network service is not available, no signal level will
be displayed on the screen.
When connected to the network other than your designated
one, the signal strength will still be displayed on the screen.
However, you can only make an emergency call.
During a call, you can use the call functions described on
page 13.
key.
9
Advertisement
Table of Contents
