Motorola T2688 User Manual page 5

It takes about 160 minutes for the travel charger to fully charge the
new battery.
On the LCD display, the battery strength bars will flash until the
battery is full. When you start charging the battery in standby
mode, the battery strength bars will start to flash a few seconds
after you plug in the phone, indicating that the battery charging
has started.
Use only genuine authorized Motorola batteries, battery charger
and accessories to ensure the proper function of your phone and
battery life. Any malfunction or damage caused by the use of any
third-party accessories will cause the void of product warranty.
For safety concerns, when the temperature of the phone goes over
45° C or below 5° C, the battery charging will come to a halt. When
the phone temperature return to a normal range, the battery
charging will resume.
Press and hold
•
the handset power.
Enter your PIN, then press
•
When entering wrong PIN for over three times in a row, your phone
will be locked up. Please contact your dealer to solve this problem.
After your PIN is accepted, the phone starts searching for
'
the designated network automatically. This may take a
few seconds. When done, you can start to dial the number
(including area code) using the keys on the keypad, then
press
When you finish your telephone call, press
'
the call and return to standby mode.
key for about two seconds to turn on
key to dial.
key.
key to end