Table of Contents
Advertisement
Digital Multiplexer
3.Weight value (REC DUTY) record
4.ALARM weight value record
5.Reservation record
- Used to record weight value (record frequency is more than the channel whose duty is low) for the impor-
tant channel.
- Perform the weight value record using the REC duty (OFF, 1~5) by channel set from the "REC DUTY" of the
"1.REC OUT SET" on the main menu.
- The channel whose duty is set to "OFF" is not recorded.
- Example)
CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1,
CH8:1, CH9:1, CH10:2, CH11:3, CH12:1, CH13:OFF, CH14:1, ....
- Record in the weight value only for the channels that alarm/motion occurs.
- Record by inserting the channel that alarm/motion occurs between channels.
- The duty of channels operates as "1" when recording the alarm weight value except that the REC duty is set
to "OFF" (channel whose duty is "OFF" is skipped).
- Perform the alarm/motion weight value record even when alarm/motion occurs in the channels whose REC
duty is set to "OFF".
- Example)
REC DUTY
CH1:1, CH2:2, CH3:1, CH4:3, CH5:OFF, CH6:1, CH7:1,
CH8:1, CH9:1, CH10:2, CH11:3, CH12:1, CH13:OFF, CH14:1, ....
Alarm occurring channel: CH1, CH9
Motion occurring channel: CH3, CH9
1
CH1 "A"
CH3 "M"
- Specific channel is used to record for a specific time.
- Use by setting the start and time of channel setting and reservation record in the "RESERVATION" of the
"1.REC OUT SET" on the setup menu.
- The channel whose duty is set to "OFF" is not recorded.
Perform the alarm weight value record for the channel set to the reservation record if the alarm occurs for
the period of reservation record.
1
9
CH9 "M"
CH9 "A"
6-2
Advertisement
Table of Contents
