1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Multiplexer
  5. SDM-090P
  6. User manual

Samsung SDM-090P User Manual

Digital multiplexer
Hide thumbs Also See for SDM-090P:
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S MANUAL
DIGITAL MULTIPLEXER

Advertisement

Table of Contents
loading

Related Manuals for Samsung SDM-090P

Summary of Contents for Samsung SDM-090P

  • Page 1 USER’S MANUAL DIGITAL MULTIPLEXER...
  • Page 2 Digital Multiplexer SDM – 090(P) USER’S MANUAL...
  • Page 3 SDM-090(P) Digital Multiplexer CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 4 SDM-090(P) Digital Multiplexer IMPORTANT SAFEGUARDS Read instructions: All the safety and operating instructions should be read before the appliance is operated. Retain instructions: The safety and operating instructions should be retained for future reference. Heed warnings: All warnings on the appliance and in the operating instructions should be adhered to.
  • Page 5 SDM-090(P) Digital Multiplexer 8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Ventilation : Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered.
  • Page 6 SDM-090(P) Digital Multiplexer 14. Object and liquid entry : Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

  • Page 7: Table Of Contents

    SDM-090(P) Digital Multiplexer CONTENTS CHAPTER 1. INTRODUCTION ........1-1~1-6 Introduction.......................1-1 Functions and Features..................1-1 Name of parts and Function................1-3 Front panel .......................1-3 Rear panel ......................1-5 CHAPTER 2. INSTALLATION ........2-1~2-5 Preparing for the Installation ................2-1 Precautions when Installing ................2-2 Unpacking......................2-5 CHAPTER 3. CONNECTING TO OTHER DEVICES..3-1~3-6 Connecting to normal VCR and Monitor ............3-1 Connecting to S-VHS VCR and S-VHS MONITOR.........3-2 Connecting to TIME LAPSE VCR..............3-3...
  • Page 8 SDM-090(P) Digital Multiplexer CHAPTER 4. BASIC METHOD TO USE.......4-1~ 4-7 Initial operation ....................4-1 When desiring to see in the live screen/replay screen ........4-2 When desiring to see in the TRIPLEX screen ..........4-2 When desiring to see in the FULL screen............4-2 When desiring to see in the division screen.............4-3 When desiring to see automatic sequential conversion screen ......4-4 When desiring to see the stop screen..............4-5...
  • Page 9 SDM-090(P) Digital Multiplexer CHAPTER 6. RECORDING..........6-1~6-3 Normal record mode..................6-1 TIME LAPSE record mode................6-2 Weight value (REC DUTY) record ..............6-2 ALARM weight value record................6-3 Reservation record ...................6-3 CHAPTER 7. OCCURRENCE AND HANDLING OF ALARM, LOSS ................7-1~7-4 Alarm occurrence conditions................7-1 Alarm release ....................7-1 Screen conversion....................7-1 Alarm record .....................7-1 Alarm signal standard..................7-2...

  • Page 10: Chapter 1 Introduction

    CHAPTER 1 Introduction...

  • Page 11: Introduction

    SDM-090(P) Digital Multiplexer CHAPTER 1.INTRODUCTION Introduction This unit can combine up to 9 Camera Images onto one VCR, and both frequent recording and sequential recording can be possible in the unit of Frame and Field, and assigned channel can be played back selectively, and it is Triplex with which Live Mode, Playback Mode, and Live plus Playback Mode can be done in one monitor.
  • Page 12 SDM-090(P) Digital Multiplexer ¥ For remote control, RS-232C Cable can be connected to PC. ¥ This unit can be powered from 100 to 240V AC. ¥ When Alarm Signal was input, the CHANNEL number, which indicates ALARM, is displayed with warning sound. Besides, if more than two ALARM signals occur simultaneously, you will have Multi Mode with which several channels can be monitored at the same time.

  • Page 13: Name Of Parts And Function

    SDM-090(P) Digital Multiplexer Name of parts and Function FRONT PANEL A. POWER SWITCH Power ON/OFF. B. MULTI SCREEN DISPLAY - MULTI SCREEN You are in the multi-screen mode. Each press of the MULTI SCREEN Button shows the picture displayed. - REC CHECK LIVE MODE: VCR output is displayed on the monitor.
  • Page 14 SDM-090(P) Digital Multiplexer D. ALARM - RESET/ERASE Button for deactivating ALARM. When ALARM is input, RESET/ERASE Button should illuminate. When “ALARM/LOSS LIST” is displayed on the screen, pressing this Button will erase page by page. - LIST Shows ALARM/LOSS LIST. E.

  • Page 15: Rear Panel

    SDM-090(P) Digital Multiplexer REAR PANEL COLD RS-232C ~AC IN MAIN SP0T A/R VTI CAMERA A. CAMERA INPUT / LOOP THROUGH OUT (IN/OUT) Up to 9 camera signals can be input. When transmitting camera signals to external devices, OUT terminal can be used. B.
  • Page 16 SDM-090(P) Digital Multiplexer C. VCR IN/OUT (BNC) Indicates terminal for connecting to VCR Input/Output. D. MONITOR OUT (BNC) Indicates terminal for connecting to Monitor’s video Input terminal. E. SPOT OUT (BNC) Indicates terminal for connecting to Monitor’s video Input terminal. F.

  • Page 17: Chapter 2 Installation

    CHAPTER 2 Installation...

  • Page 18: Preparing For The Installation

    SDM-090(P) Digital Multiplexer CHAPTER 2. INSTALLATION Preparing for the Installation The following information is prepared for safe installation of the unit. This unit can be placed on a flat table or installed in the rack. It should not be used vertically or skew, but horizontally. The location of the unit and the composition of wiring are very important in properly operating the system.

  • Page 19: Precautions When Installing

    SDM-090(P) Digital Multiplexer Precautions when Installing Precautions when Installing ¥ Be sure to turn the unit off before installing. ¥ Avoid shock or vibration since they may cause unit malfunction. ¥ Keep away from magnets, radio or TV to avoid magnetic damage. ¥...
  • Page 20 SDM-090(P) Digital Multiplexer ¥ Place the unit on a flat surface and 15Cm maintain temperature properly. Allow 15 cm of clearance between the rear panel and the wall. ¥ Be careful not to drop any conductive materials into the hole for ventilation ¥...
  • Page 21 SDM-090(P) Digital Multiplexer ¥ If ignoring smoke or smell while using the unit, fire or electric shock may occur. In this case, turn the power switch off immediately, and consult professionals in the closest service center. ¥ Be sure to check dangers, which may occur due to damped floor, ungrounded power extension cable, worn power cord or lack of safety grounding.

  • Page 22: Unpacking

    SDM-090(P) Digital Multiplexer UNPACKING Place shipping container on a flat surface, cut straps or tape, open top. Then, review the content; the following items should be included: ¥ Main Unit ¥ User Manual (this document) ¥ One (1) Power Unit ¥...
  • Page 23 CHAPTER 3 Connecting to Other Devices...

  • Page 24: Chapter 3. Connecting To Other Devices

    SDM-090(P) Digital Multiplexer CHAPTER 3. Connecting to Other Devices This unit can be connected to other devices such as monitor, camera, VCR, and PC. This chapter describes how to connect the unit to other devices. CAUTIONS Be sure that voltages higher than 2 VDC should not be input to the input terminal of Camera and Video.

  • Page 25: Connecting To S-Vhs Vcr And S-Vhs Monitor

    SDM-090(P) Digital Multiplexer 2. Connecting to S-VHS VCR and S-VHS MONITOR When playing back TAPE by connecting to S-VHS, select “Y/C” in “PB IN” Mode, once you in “2.MON OUT SET” Mode in SETUP Menu. 1. Connect a S-JACK cable to the VCR IN 4-pin terminal on the Unit’s Rear Panel and to the OUT terminal on the VCR.

  • Page 26: Connecting To Time Lapse Vcr

    SDM-090(P) Digital Multiplexer 3. Connecting to TIME LAPSE VCR When connecting the unit to the TIME LAPSE VCR, set “TLV” in “REC TYPE” after selecting “1.REC OUT SET” of SETUP MENU. 1. Connect a S-JACK cable to the VTI terminal on the Unit’s Rear Panel and to the REC TRIG OUT terminal on the VCR.

  • Page 27: Connecting To Alarm Sensor

    SDM-090(P) Digital Multiplexer 4. Connecting to ALARM SENSOR 1. Connect the ALARM terminal on the Unit’s Rear Panel to the SENSOR CORRESPONDING TO camera number. 2. Connect grounding wires. 3. Connect the HOT terminal on the Unit’s Rear Panel to the ALARM IN terminal on the VCR.

  • Page 28: Remote Control By Connecting To Pc

    SDM-090(P) Digital Multiplexer 5. Remote Control by connecting to PC A. Connecting to RS-232C The unit can be remote-controlled by connecting to PC in which terminal emulation program is built. At this time, RS-232C Cable is used for connection. When connecting to the PC by RS-232C, some keys on the PC keyboard can be used as Function Buttons on the Unit’s Front Panel.
  • Page 29 SDM-090(P) Digital Multiplexer ASCII Function ASCII Function LIST MENU A(AUTO) SEQUENCE ENTER FREEZE ZOOM (MOVE ) (MOVE ) W(WINDOW) MULTI SCREEN (MOVE REC CHECK/PB (MOVE THROUGH LIVE/PB LEFT_UP TRIPLEX LEFT_DOWN RIGHT_UP RESET RIGHT_DOWN ¥ Transmission speed : Select from 4800,9600, 19200, 38400 bps ¥...
  • Page 30 CHAPTER 4 Basic Method to use...

  • Page 31: Chapter 4. Basic Method To Use

    SDM-090(P) Digital Multiplexer Chapter 4. Basic Method to use Initial operation 1. Turn on power switch. A 4-division screen appears on the monitor if firstly operating after purchase. In this case, the channel without inputting appears in the blue background on the screen and a video loss occurs.

  • Page 32: When Desiring To See In The Live Screen/Replay Screen

    SDM-090(P) Digital Multiplexer When desiring to see in the live screen/replay screen The “live/P.B” select button determines the live screen/replay screen mode. The LED turns on in the live mode and it turns off in the tape replay mode. If pressing this button, the indication mode is changed to the replay mode for the live mode and to the live mode for the replay mode.

  • Page 33: When Desiring To See In The Division Screen

    SDM-090(P) Digital Multiplexer When desiring to see in the division screen The division screen may be seen in the live replay mode and triplex mode and the division mode of 2, 4, 7, 9 exists as a screen select mode. The only division mode of 2, 4, 9 is available in the triplex mode.

  • Page 34: When Desiring To See Automatic Sequential Conversion Screen

    SDM-090(P) Digital Multiplexer When desiring to see automatic sequential conversion screen The automatic sequential conversion mode operates in the LIVE screen status and consists of the following 2 cases: The FULL screen is converted if pressing the “SEQUENCE” button in the FULL screen status.

  • Page 35: When Desiring To See The Stop Screen

    SDM-090(P) Digital Multiplexer When desiring to see the stop screen The monitor screen (full screen and division) may be seen with a temporary stop. A desired screen may be temporarily stopped selectively in the division screen indication mode. 1. FREEZE setting of FULL screen The LED turns on and monitor image stops and “FREEZE”...

  • Page 36: When Desiring To See In The Zoom Screen

    SDM-090(P) Digital Multiplexer When desiring to see in the zoom screen The zoom screen operates if pressing “ZOOM” button in the FULL mode. The mode is changed in the following order whenever pressing this button. 2TIMES 4 TIMES FULL MODE FULL MODE ZOOM ZOOM...

  • Page 37: When Desiring To See In The Record Screen

    SDM-090(P) Digital Multiplexer The “PIP” button does not operate in the following cases: - In replay mode or TRIPLEX mode - In division screen - In automatic sequential conversion mode - In zoom operation - In setting program mode - In displaying ALARM/LOSS LIST on screen When desiring to see in the record screen You can see the record output screen in the live mode using the “REC CHECK”.
  • Page 38 CHAPTER 5 Setting of Program Menu...

  • Page 39: Chapter 5. Setting Of Program Menu

    SDM-090(P) Digital Multiplexer Chapter 5. Setting of Program Menu <MAIN MENU> The following main menu is displayed on the monitor screen if pressing “MENU” button, the “MENU” LED turns on. The LED turns off if pressing the button and it returns to the previous status.
  • Page 40 SDM-090(P) Digital Multiplexer - The blinking indication moves if pressing “ ”, “ ” button. - The setting value is changed if pressing “ ”, “ ” button. - The changed setting value is stored if pressing the “SET” button. You can return to the main menu.

  • Page 41: Setting Of Display Mode

    SDM-090(P) Digital Multiplexer - The following screen is displayed if pressing the “ENTER” button where the blinking position is “ON…” at the “RESERVATION ….”. [REC RESERVATION] START TIME 12:30[HH:MM] END TIME 23:59[HH:MM] CH1 : OFF CH2 : OFF CH3 : OFF CH4 : OFF CH5 : OFF CH6 : OFF...
  • Page 42 SDM-090(P) Digital Multiplexer [MON OUT SET] LIVE DISPLAY ALL PB DISPLAY SPOT OUT... PB IN CVBS PIP SIZE BORDER COLOR WHITE SEQUENCE... LOSS DETECT... LOSS INFO ALARM INFO - The blinking indication moves if pressing “ ”, “ ” button. - The setting value is changed if pressing “...
  • Page 43 SDM-090(P) Digital Multiplexer - The following is displayed if pressing the “ENTER” button with the blinking position placed at the “SPOT OUT...”: [SPOT OUT] CH1 : 02 CH2 : 00 CH3 : 00 CH4 : 00 CH5 : 00 CH6 : 00 CH7 : 00 CH8 : 00 CH9 : 00...
  • Page 44 SDM-090(P) Digital Multiplexer - The following is displayed if pressing the “ENTENR” button with the blinking position placed at “SEQUENCE….”: [SEQUENCE] CH1 : 02 CH2 : 02 CH3 : 02 CH4 : 02 CH5 : 02 CH6 : 02 CH7 : 02 CH8 : 02 CH9 : 02 ¥...

  • Page 45: Setting Of Title By Channel

    SDM-090(P) Digital Multiplexer 3.Setting of title by channel - You can set of each channel. - The following screen is displayed if pressing the “ENTER” button with the blinking indication placed the “3. CHANNEL TITLE SET” by pressing the “MOVE” button on the main menu screen: [CHANNEL TITLE SET] CH1:--- CH1----...

  • Page 46: Setting Of Display Mode For Current Time, Year, Month And Date

    SDM-090(P) Digital Multiplexer 4.Setting of display mode for current time, year, month and date Set the current date and time and the display mode of year, month and date. The following screen is displayed if pressing the “ENTER” button with the blinking indication placed at the “4.DATE/TIME SET”...

  • Page 47: Setting Of Alarm

    SDM-090(P) Digital Multiplexer 5. Setting of alarm Set operation when alarm occurs. The following screen is displayed if pressing the “ENTER” button with the blinking indication placed at the “5.ALARM SET” by pressing the “MOVE” button on the main menu screen: [ALARM SET] HOLD TIME 01 MIN...

  • Page 48: System Setting

    SDM-090(P) Digital Multiplexer 6.System setting Set application of password change, buzzer and summer time. The following screen is displayed if pressing the “ENTER” button with the blinking indication placed at the “6. SYSTEM SET” on the main menu screen: [SYSTEM SET] BAUD RATE 38400 PASSWORD CHANGE...
  • Page 49 SDM-090(P) Digital Multiplexer - The following screen is displayed if pressing the “ENTER” button when the blinking position is at the “PASSWORD CHANGE…”: [PASSWORD CHANGE] PASSWORD CHECK - - - - - - - - NEW PASSWORD - - - - - - - - CONFIRM - - - - - - - - ¥...
  • Page 50 SDM-090(P) Digital Multiplexer - Password check The following screen is displayed if the “password check” turns “ON” when entering to the setup menu: PASSWORD CHECK +++++++++++++++++ + - - - - - - - - + +++++++++++++++++ Enter the current password in order. Enter into the setup menu (main menu) if the current password is proper.

  • Page 51: Chapter 6 Recording

    CHAPTER 6 Recording...
  • Page 52 SDM-090(P) Digital Multiplexer 5-14...

  • Page 53: Normal Record Mode

    SDM-090(P) Digital Multiplexer Chapter 6. Recording 1.Normal record mode When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “NOR”. (1) Frame record - When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to FRAME.

  • Page 54: Time Lapse Record Mode

    SDM-090(P) Digital Multiplexer 2. TIME LAPSE record mode - When setting the “REC TYPE” of the setup menu “1.REC OUT SET” to “TLV”. - The image signal entered from the maximum 9 cameras is recorded on the VCR in response to the trigger signal of VCR. - The recorded output records the only channel that the “REC DUTY”...

  • Page 55: Alarm Weight Value Record

    SDM-090(P) Digital Multiplexer 4. ALARM weight value record - Record in the weight value only for the channels that alarm occurs. - Record by inserting the channel that alarm occurs between channels. - The duty of channels operates as “1” when recording the alarm weight value except that the REC duty is set to “OFF”...
  • Page 56 CHAPTER 7 Occurrence and handling of alarm, loss...
  • Page 57 SDM-090(P) Digital Multiplexer...

  • Page 58: Chapter 7. Occurrence And Handling Of Alarm, Loss

    SDM-090(P) Digital Multiplexer Chapter 7. Occurrence and handling of alarm, loss 1.Alarm occurrence conditions The following events occur if alarm occurs since the sensor is connected to the alarm input terminal on the backside: 1) Warning sounds (if buzzer turns “ON”). 2) Alarm information (date and time when alarm occurs) is recorded on the alarm list.

  • Page 59: Alarm Signal Standard

    SDM-090(P) Digital Multiplexer 5.Alarm signal standard You can view record output when alarm occurs during record. For example, if record status have the following conditions: ¥ Currently perform record in the TLV mode on the time lapse VCR. ¥ Set the “REC TYPE” to “NOR” in the “5. ALARM SET” of the “program mode”. The record output until release after the alarm occurs is as follows: VCR TRIG TRIG override...

  • Page 60: Alarm/Loss List Reference

    SDM-090(P) Digital Multiplexer 6.Alarm/Loss list reference If pressing the “LIST” button on the front, alarm, channel loss and motion detection information recently occurred is output up to 100EA (10EA x 10 page) on screen in the occurrence as follows: Current page/ current page [ALARM/LOSS LIST] [ALARM/LOSS LIST] [ALARM/LOSS LIST]...

  • Page 61: Operation In Video Loss

    SDM-090(P) Digital Multiplexer 7.Operation in video loss The following operation is performed if the failure occurs in signal due to poor cable and cutting, etc for the channel that is set to “ON” in the “LOSS DETECT” of the “2.MON OUT SET” in the main menu: 1) Warning tone sounds (if buzzer turns “ON”).
  • Page 62 Appendix A SDM-090(P)Specifications...

  • Page 63: Appendix A Specifications

    SDM-090(P) Digital Multiplexer Appendix A Specifications 1) Image input Camera: 9 input (color or black/white, BNC Type, Loop Through) , 75 Ω automatic termination, CVBS 1.0V : 2 input (VCR Playback input) VBS entry (color or black/white, BNC Type),1.0V , 75Ω terminations S-VHS Y/C input –...
  • Page 64 SDM-090(P) Digital Multiplexer 4) AUTO SWITCHER Auto switcher time: Selectable of 0 ~ 30 seconds 5) Multiple output screen: Full, 2,4,7,9 Zoom, PIP 6) Cathodized bit numbers: 8 BIT (256 pairs) 7) Sampling frequency: 4 * FSC 8) Horizontal resolution: More than 400TV Lines 9) Memory Back UP: 5 years 10) Operation temperature: 0 C ~ 40 C...

  • Page 65: Outside Drawing

    SDM-090(P) Digital Multiplexer OUTSIDE DRAWING...
  • Page 66 Appendix B Checking points in trouble...

  • Page 67: Appendix B Checking Points In Trouble

    SDM-090(P) Digital Multiplexer Appendix B Checking points in trouble There may be a case not to use system properly since unexpected status occurs while using the system. In this case, such status is actually caused by a critical error in system but a simple first-aid can solve this status in the most case.
  • Page 68 SDM-090(P) Digital Multiplexer When record tape is not replayed. ¥ Ensure the connection between the video-out terminal of VCR and the VCR IN of this unit is properly performed. ¥ Ensure the connection between the video-in terminal of monitor and the MON OUT of this unit is properly performed.
  • Page 69 Part No.: AB68 -00125A Printed in Korea...

This manual is also suitable for:

Sdm-090

Table of Contents