Digital Multiplexer
Chapter 6. Recording
1.Normal record mode
When setting the "REC TYPE" of the setup menu "1.REC OUT SET" to "NOR".
(1) Frame record
(2) Field record
2. TIME LAPSE record mode
- When setting the "REC TYPE" of the setup menu "1.REC OUT SET" to "TLV".
- The image signal entered from the maximum 16 cameras is recorded on the VCR in response to the trigger
- The recorded output records the only channel that the "REC DUTY" of the "1.REC OUT SET" is set to more
- The trigger out of VCR and the VTR terminal this unit must be connected.
- "NO TRIGGER" character is displayed on screen while operating the field record operation of the normal
- When setting the "REC TYPE" of the setup menu "1.REC OUT SET" to FRAME.
- The image signal entered from the maximum 16 cameras is output in Frame and recorded on the VCR.
- The recorded output records the only channel that the "REC DUTY" of the "1.REC OUT SET" is set to
more than 1.
1/30sec(NTSC), 1/25(PAL)
- When setting the "REC TYPE" of the setup menu "1.REC OUT SET" to "FIELD".
- The image signal entered from the maximum 16 cameras is output in Field and recorded on the VCR.
- The recorded output records the only channel that the "REC DUTY" of the "1.REC OUT SET" is set to
more than 1.
1/60sec(NTSC), 1/50(PAL)
signal of VCR.
than 1.
mode if the trigger signal is not received for 10 seconds.
T
T
T
Trigger output from TIME LAPSE VCR
T
T
T
T
T
T
T
T
T
T
6-1
T
T
T
T
T
T
T