Connecting To Time Lapse Vcr - Samsung SDM-160 User Manual

Digital Multiplexer

3. Connecting to TIME LAPSE VCR

When connecting the unit to the TIME LAPSE VCR, set "TLV" in "REC TYPE" after selecting "1.REC
OUT SET" of SETUP MENU.
1. Connect a S-JACK cable to the VTI terminal on the Unit's Rear Panel and to the REC TRIG OUT
terminal on the VCR.
2. Connect a S-JACK cable to the 'G' terminal on the Unit's Rear Panel and to the 'G' terminal on the
VCR.
3. Connect a cable to the VCR IN terminal on the Unit's Rear Panel and to the VCR OUT terminal on the
VCR. Likewise, connect a cable to the VCR IN terminal on the Unit's Rear Panel and to the VCR OUT
terminal on the VCR.
CAUTIONS
Depending on the kinds of TIME LAPSE VCR, the name of REC TRIGGER OUT terminal may be different,
so be sure to connect after checking its name.
3-2