Pre-Event
Highlight Pre-Event and press the
up in the Record Schedule, a message will display alerting you to this fact.
When the DVR is in the Event Record mode it is possible to have it record images before the event occurs. The Pre-Event
screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from Very High, High, Standard and Basic, and image resolution
can be selectable from Very High (D1), High (Half D1) and Standard (CIF).
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set the Dwell from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum ips can be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the time
settings.
Archive
Highlight Archive and press the
button, and the Pre-Event setup screen appears. If you do not have Event set
Figure 16 : Record – Pre-Event setup screen.
button, and the Archive setup screen appears.
Figure 17 : Record – Archive setup screen.
Digital Video Recorder
25