Hunter Bath Ventilator Fan Installation Manual page 7

A12
Pull the wires through the strain relief.
A14
Fan Motor
Light
*Option Fan & Main Light Together
A15
F
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the wiring cover plate.
6
Black
2 Pin
White
White
3 Pin
Black Light
*Option
Connect wires as shown.
D
E
A13
Tighten the strain relief screws.
Ground
Green
A
Bare Copper
Black Main Switch 1 (AC In)
White
Black Switch 2 (AC In)
0 A16
Connect a 4" duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may need
to be purchased.
D
41788-01 6/1/2005