Hunter 9020X Owner's Manual page 7

Installation & operation
4. Grasp the Stationary Leg and position the Stationary Leg Split
Sleeve onto the Downrod, over the Downrod Cup. See Figure 3a.
While maintaining your grasp on the Stationary Leg, bring the Ad-
justable Leg forward, positioning the Adjustable Leg Split Sleeve
around the Downrod Cup. See Figure 3b. Lower the Split Sleeve
into the Downrod Cup. See Figure 3c
Figure 3a
5. FOR MODELS WITH THE SNAKE LAMP - Open the Snake Lamp
Cage. Install an R20 50W max. light bulb (not supplied). NOTE:
Use ONLY an R20 50W max. light bulb in your Garage Fan Snake
Lamp. Shut the Snake Lamp Cage.
6. Plug your fan's Power Cord into a 120V 60Hz outlet.
Stationary
Leg
Figure 3b

Figure 3c
42727-01