Maintenance - Hunter 9020X Owner's Manual

Maintenance

This fan is permanently lubricated and will not require additional lubri-
cation (oil) for the life of the fan.
This fan requires little maintenance and contains no user serviceable
parts. DO NOT try to fix it yourself. Contact qualified service personnel if
servicing is needed.
TO CLEAN:
1. Before cleaning, turn the fan off and remove the plug from electrical
outlet.
2. Wipe off excess dust with a lint-free cloth. To ensure adequate air
circulation to the motor, keep the vents located at the rear of the
motor housing free from dust accumulation. A vacuum cleaner can
be used to clean these vents.
3. DO NOT immerse the fan in water or any other liquid.
CLEANING THE GRILLES AND BLADES:
1. Turn the fan off and remove the plug from the electrical outlet.
2. Remove the Front Grille (with the Hunter logo plate) by removing
the eight screws that hold it to the Fan.
3. The Grilles and the Blade Assembly may be cleaned with a damp
lint-free cloth.
4. DO NOT allow water or any other liquid to get into the motor hous-
ing.
5. When the Grilles and Fan Blades have dried completely, reassemble
the Front Grille to the Fan.
6. DO NOT plug fan into an electrical outlet until it has been fully reas-
sembled.
42727-01
10