Page 4
14. dO nOT operate fan in the presence of explosive and/or flammable fumes. 15. dO nOT place fan or any parts near an open flame, cooking or any other heating appliances. 16. dO nOT use near curtains, plants, window treatments, etc.
4. Remove the Plastic Sleeve from the motor housing shaft and discard. 5. Install the Fan Blade (4) by sliding it over the motor housing shaft, lining up the cut-outs on the back of the Blade with the Retaining Pins on the Motor shaft.
1. Slide the Telescope Rod (7) into the top of the Stand Base (8) of the stand fan. The pole is notched so it will only fit into the base 1 way. Figure 7. 2. Secure the Telescope Rod (7) by screwing the Base nut (9) onto it from underneath the base.
1. Align the Fan Assembly over the Table Base (10) and push together until secure. Figure 10. 2. Turn the Table Fan over and secure the 2 pieces together using the 3 Table Base Screws. Figure 11. Before installing the Wall Mount Adapter, ensure the fan location is close enough to a wall adapter that the fan can be plugged in.
A vacuum cleaner hose can be used to clean these vents. dO nOT immerse the fan in water or any other liquid. ClEAnIng THE gRIll And BlAdE: 1. Turn the fan off and unplug from the electrical outlet.
Central Time. you may also contact us over the Internet at www.hunterfan.com. WarranTy The Hunter Fan Company makes the following limited warranty to the user or consumer purchaser of this Hunter Portable fan: If your Hunter Portable Fan motor fails at any time within...
Page 11
OR OTHER FAn PART, IS EXPRESSly lIMITEd TO THE PERIOd OF THE EXPRESS WARRAnTy SET FORTH ABOvE FOR SUCH MOTORS And OTHER PARTS. This warranty is voided if your Hunter Fan is not purchased and used in the USA. This warranty excludes and does not cover defects,...
We will return your Hunter Fan freight prepaid. your portable fan should be properly packed to avoid damage in transit since we will not be responsible for any such damage.